dmesg - Intel Xeon X5570

Return To Intel Xeon X5570 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 00000000bf379000 (usable)
 BIOS-e820: 00000000bf379000 - 00000000bf38f000 (reserved)
 BIOS-e820: 00000000bf38f000 - 00000000bf3ce000 (ACPI data)
 BIOS-e820: 00000000bf3ce000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000640000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xFCAC0
DMI: Dell Inc. PowerEdge R710/0HYPX2, BIOS 6.1.0 10/18/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x640000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-D3FFF write-back
  D4000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 0100000000 mask FF00000000 write-back
  3 base 0200000000 mask FE00000000 write-back
  4 base 0400000000 mask FE00000000 write-back
  5 base 0600000000 mask FFC0000000 write-back
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf379 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf379000
 0000000000 - 00bf200000 page 2M
 00bf200000 - 00bf379000 page 4k
kernel direct mapping tables up to bf379000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000640000000
 0100000000 - 0640000000 page 2M
kernel direct mapping tables up to 640000000 @ b000-25000
RAMDISK: 7d074000 - 7ffff600
ACPI: RSDP 00000000000f1170 00024 (v02 DELL  )
ACPI: XSDT 00000000000f1274 00094 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: FACP 00000000bf3b3f9c 000F4 (v03 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: DSDT 00000000bf38f000 03D72 (v01 DELL   PE_SC3   00000001 INTL 20050624)
ACPI: FACS 00000000bf3b6000 00040
ACPI: APIC 00000000bf3b3478 0015E (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SPCR 00000000bf3b35d8 00050 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: HPET 00000000bf3b362c 00038 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: DMAR 00000000bf3b3668 001B0 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: MCFG 00000000bf3b38c4 0003C (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: WD__ 00000000bf3b3904 00134 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SLIC 00000000bf3b3a3c 00176 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: ERST 00000000bf392ef4 00270 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: HEST 00000000bf393164 003A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: BERT 00000000bf392d74 00030 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: EINJ 00000000bf392da4 00150 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SRAT 00000000bf3b3bc0 00370 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: TCPA 00000000bf3b3f34 00064 (v02 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 1 -> APIC 16 -> Node 0
SRAT: PXM 1 -> APIC 18 -> Node 0
SRAT: PXM 1 -> APIC 20 -> Node 0
SRAT: PXM 1 -> APIC 22 -> Node 0
SRAT: PXM 1 -> APIC 17 -> Node 0
SRAT: PXM 1 -> APIC 19 -> Node 0
SRAT: PXM 1 -> APIC 21 -> Node 0
SRAT: PXM 1 -> APIC 23 -> Node 0
SRAT: Node 0 PXM 1 0-c0000000
SRAT: Node 0 PXM 1 100000000-640000000
NUMA: Using 32 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000640000000
  NODE_DATA [0000000000020000 - 0000000000053fff]
  bootmap [0000000000100000 -  00000000001c7fff] pages c8
(8 early reservations) ==> bootmem [0000000000 - 0640000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000201faa4]    TEXT DATA BSS ==> [0001000000 - 000201faa4]
  #3 [007d074000 - 007ffff600]          RAMDISK ==> [007d074000 - 007ffff600]
  #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
  #5 [0002020000 - 0002020759]              BRK ==> [0002020000 - 0002020759]
  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #7 [000000b000 - 0000020000]          PGTABLE ==> [000000b000 - 0000020000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 25600MB)
 [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880028600000-ffff88003d5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00640000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x000000a0
    0: 0x00000100 -> 0x000bf379
    0: 0x00100000 -> 0x00640000
On node 0 totalpages: 6288152
  DMA zone: 56 pages used for memmap
  DMA zone: 124 pages reserved
  DMA zone: 3819 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 764849 pages, LIFO batch:31
  Normal zone: 75264 pages used for memmap
  Normal zone: 5429760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf379000 - 00000000bf38f000
PM: Registered nosave memory: 00000000bf38f000 - 00000000bf3ce000
PM: Registered nosave memory: 00000000bf3ce000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88003d600000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 6198428
Policy zone: Normal
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 24607568k/26214400k available (5325k kernel code, 1061792k absent, 545040k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2926.027 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.05 BogoMIPS (lpj=2926027)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6
dmar: RMRR base: 0x000000bf4c8000 end: 0x000000bf4dffff
dmar: RMRR base: 0x000000bf4b1000 end: 0x000000bf4bffff
dmar: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff
dmar: RMRR base: 0x000000bf4a3000 end: 0x000000bf4a3fff
dmar: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff
dmar: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff
dmar: RMRR base: 0x000000bf4c0000 end: 0x000000bf4c0fff
dmar: RMRR base: 0x000000bf4c2000 end: 0x000000bf4c2fff
dmar: ATSR flags: 0x0
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           X5570  @ 2.93GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
Total of 8 processors activated (46816.43 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfdffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xec40-0xec5f]
pci 0000:00:1a.1: reg 20: [io  0xec60-0xec7f]
pci 0000:00:1a.7: reg 10: [mem 0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xec80-0xec9f]
pci 0000:00:1d.1: reg 20: [io  0xeca0-0xecbf]
pci 0000:00:1d.7: reg 10: [mem 0xdf0ff000-0xdf0ff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: reg 10: [io  0xec10-0xec17]
pci 0000:00:1f.2: reg 14: [io  0xec08-0xec0b]
pci 0000:00:1f.2: reg 18: [io  0xec18-0xec1f]
pci 0000:00:1f.2: reg 1c: [io  0xec0c-0xec0f]
pci 0000:00:1f.2: reg 20: [io  0xec20-0xec2f]
pci 0000:00:1f.2: reg 24: [io  0xec30-0xec3f]
pci 0000:01:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xdf180000-0xdf1bffff 64bit]
pci 0000:03:00.0: reg 18: [io  0xfc00-0xfcff]
pci 0000:03:00.0: reg 1c: [mem 0xdf1c0000-0xdf1fffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xdf100000-0xdf107fff pref]
pci 0000:03:00.0: supports D1
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0:   bridge window [io  0xf000-0xffff]
pci 0000:00:04.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 04-04]
pci 0000:00:05.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 06-06]
pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: PCI bridge to [bus 07-07]
pci 0000:00:09.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:03.0: reg 10: [mem 0xd5800000-0xd5ffffff pref]
pci 0000:08:03.0: reg 14: [mem 0xde7fc000-0xde7fffff]
pci 0000:08:03.0: reg 18: [mem 0xde800000-0xdeffffff]
pci 0000:08:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0:   bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x15)
 pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0080-0x009f]
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io  0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io  0x02f8-0x02ff]
pnp 00:06: [irq 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io  0x0800-0x087f]
pnp 00:07: [io  0x00e0-0x00e7]
pnp 00:07: [io  0x0880-0x08ff]
pnp 00:07: [io  0x0900-0x091f]
pnp 00:07: [io  0x0920-0x0923]
pnp 00:07: [io  0x0924]
pnp 00:07: [io  0x0c00-0x0c7f]
pnp 00:07: [io  0x0ca0-0x0ca7]
pnp 00:07: [io  0x0ca9-0x0cab]
pnp 00:07: [io  0x0cad-0x0caf]
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: [io  0x0ca8]
pnp 00:08: [io  0x0cac]
pnp 00:08: [irq 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:09: [mem 0xe0000000-0xefffffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: [mem 0xfed90000-0xfed91fff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io  0x0800-0x087f] has been reserved
system 00:07: [io  0x0880-0x08ff] could not be reserved
system 00:07: [io  0x0900-0x091f] has been reserved
system 00:07: [io  0x0920-0x0923] has been reserved
system 00:07: [io  0x0924] has been reserved
system 00:07: [io  0x0c00-0x0c7f] has been reserved
system 00:07: [io  0x0ca0-0x0ca7] has been reserved
system 00:07: [io  0x0ca9-0x0cab] has been reserved
system 00:07: [io  0x0cad-0x0caf] has been reserved
system 00:08: [io  0x0ca8] has been reserved
system 00:08: [io  0x0cac] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed91fff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0:   bridge window [io  0xf000-0xffff]
pci 0000:00:04.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 04-04]
pci 0000:00:05.0: PCI bridge to [bus 04-04]
pci 0000:00:05.0:   bridge window [io  disabled]
pci 0000:00:05.0:   bridge window [mem disabled]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0:   bridge window [io  disabled]
pci 0000:00:06.0:   bridge window [mem disabled]
pci 0000:00:06.0:   bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 06-06]
pci 0000:00:07.0: PCI bridge to [bus 06-06]
pci 0000:00:07.0:   bridge window [io  disabled]
pci 0000:00:07.0:   bridge window [mem disabled]
pci 0000:00:07.0:   bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 07-07]
pci 0000:00:09.0: PCI bridge to [bus 07-07]
pci 0000:00:09.0:   bridge window [io  disabled]
pci 0000:00:09.0:   bridge window [mem disabled]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0:   bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
  alloc irq_desc for 53 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:08: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1a.0: PCI INT A disabled
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.1: PCI INT B disabled
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.7: PCI INT C disabled
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.0: PCI INT A disabled
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:08:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 48685k freed
dmar: Device scope device [0000:00:1a.02] not found
dmar: Device scope device [0000:00:1d.02] not found
IOMMU 0xfed90000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf4c2000 - 0xbf4c3000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf4c0000 - 0xbf4c1000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf4a7000 - 0xbf4a8000]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf4a5000 - 0xbf4a6000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf4a3000 - 0xbf4a4000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf4a1000 - 0xbf4a2000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf4b1000 - 0xbf4c0000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf4b1000 - 0xbf4c0000]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf4b1000 - 0xbf4c0000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf4b1000 - 0xbf4c0000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf4c8000 - 0xbf4e0000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf4c8000 - 0xbf4e0000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
  alloc irq_desc for 56 on node 0
  alloc kstat_irqs on node 0
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
audit: initializing netlink socket (disabled)
type=2000 audit(1390447125.167:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 8A44323FB303E068
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 57 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 57 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 58 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 58 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
  alloc irq_desc for 59 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:04.0: irq 59 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 60 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 60 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 61 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:06.0: irq 61 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
  alloc irq_desc for 62 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 62 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
  alloc irq_desc for 63 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 63 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0fe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2014-01-23 03:18:46 UTC (1390447126)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-335.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
megasas: 06.700.06.00-rh1 Sat. Aug. 31 17:00:00 PDT 2013
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 3:slot 0:func 0
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
megaraid_sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
megaraid_sas 0000:03:00.0: setting latency timer to 64
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
megaraid_sas 0000:03:00.0: Controller type: MR,Memory size is: 256MB
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:3:0: Direct-Access     SEAGATE  ST3300657SS-H    EH02 PQ: 0 ANSI: 5
usb 1-1: new high speed USB device number 2 using ehci_hcd
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe67000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 102
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000 
DMAR:[fault reason 06] PTE Read access is not set
scsi 0:0:32:0: Enclosure         DP       BACKPLANE        1.07 PQ: 0 ANSI: 5
dmar: DRHD: handling fault status reg 202
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe89000 
DMAR:[fault reason 06] PTE Read access is not set
usb 1-1: New USB device found, idVendor=0781, idProduct=5567
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Cruzer Blade
usb 1-1: Manufacturer: SanDisk
usb 1-1: SerialNumber: 20044528730CEB005E58
usb 1-1: configuration #1 chosen from 1 choice
scsi 0:2:0:0: Direct-Access     DELL     PERC 6/i         1.22 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.13
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
Refined TSC clocksource calibration: 2925.999 MHz.
Switching to clocksource tsc
usb 1-3: new high speed USB device number 3 using ehci_hcd
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
ata1.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TEAC     DVD-ROM DV-28SW  R.2A PQ: 0 ANSI: 5
usb 5-1: new low speed USB device number 2 using uhci_hcd
sd 0:2:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2
sd 0:2:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 5-1: New USB device found, idVendor=0624, idProduct=0294
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Dell 03R874
usb 5-1: Manufacturer: Avocent
usb 5-1: configuration #1 chosen from 1 choice
input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.0-1/input0
input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.0-1/input1
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/sda2
usb 5-2: new full speed USB device number 3 using uhci_hcd
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
usb 5-2: New USB device found, idVendor=0624, idProduct=0248
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: USB Composite Device-0
usb 5-2: Manufacturer: Avocent
usb 5-2: SerialNumber: 20080519
usb 5-2: configuration #1 chosen from 1 choice
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
type=1404 audit(1390447128.073:2): selinux=0 auid=4294967295 ses=4294967295
dracut: 
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
generic-usb 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
dracut: Switching root
usb 1-3.1: new low speed USB device number 4 using ehci_hcd
usb 1-3.1: New USB device found, idVendor=0461, idProduct=4d81
usb 1-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.1: Product: USB Optical Mouse
usb 1-3.1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input6
generic-usb 0003:0461:4D81.0005: input,hidraw4: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.7-3.1/input0
usb 1-3.2: new low speed USB device number 5 using ehci_hcd
usb 1-3.2: New USB device found, idVendor=413c, idProduct=2107
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: Product: Dell USB Entry Keyboard
usb 1-3.2: Manufacturer: Dell
usb 1-3.2: configuration #1 chosen from 1 choice
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input7
generic-usb 0003:413C:2107.0006: input,hidraw5: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1a.7-3.2/input0
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
udev: starting version 147
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
  alloc irq_desc for 36 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
bnx2 0000:01:00.0: setting latency timer to 64
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:01:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr b8:ac:6f:80:8a:1a
  alloc irq_desc for 48 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
bnx2 0000:01:00.1: setting latency timer to 64
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:01:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr b8:ac:6f:80:8a:1c
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:02:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr b8:ac:6f:80:8a:1e
  alloc irq_desc for 42 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:02:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr b8:ac:6f:80:8a:20
EDAC MC: Ver: 2.1.0 Nov 22 2013
scsi 0:0:32:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
dmar: DRHD: handling fault status reg 302
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe86000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 402
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe82000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 502
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffdfe000 
DMAR:[fault reason 06] PTE Read access is not set
ses 0:0:32:0: Attached Enclosure device
udev: renamed network interface eth1 to em2
udev: renamed network interface eth0 to em1
udev: renamed network interface eth3 to em4
udev: renamed network interface eth2 to em3
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI Error: No handler for Region [IPMI] (ffff880636950420) [IPMI] (20090903/evregion-319)
ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff8806368df4c0), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff8806368df560), AE_NOT_EXIST
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-759)
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x19, date = 2013-06-21 
microcode: CPU1 updated to revision 0x19, date = 2013-06-21 
microcode: CPU2 updated to revision 0x19, date = 2013-06-21 
microcode: CPU3 updated to revision 0x19, date = 2013-06-21 
microcode: CPU4 updated to revision 0x19, date = 2013-06-21 
microcode: CPU5 updated to revision 0x19, date = 2013-06-21 
microcode: CPU6 updated to revision 0x19, date = 2013-06-21 
microcode: CPU7 updated to revision 0x19, date = 2013-06-21 
Adding 8388600k swap on /dev/sda1.  Priority:-1 extents:1 across:8388600k 
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  alloc irq_desc for 64 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
  alloc irq_desc for 65 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
  alloc irq_desc for 66 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
  alloc irq_desc for 67 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
  alloc irq_desc for 68 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 68 for MSI/MSI-X
  alloc irq_desc for 69 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 69 for MSI/MSI-X
  alloc irq_desc for 70 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 70 for MSI/MSI-X
  alloc irq_desc for 71 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 71 for MSI/MSI-X
  alloc irq_desc for 72 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 72 for MSI/MSI-X
bnx2 0000:01:00.0: em1: using MSIX
ADDRCONF(NETDEV_UP): em1: link is not ready
bnx2 0000:01:00.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
em1: no IPv6 routers present
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
TECH PREVIEW: fscache may not be fully supported.
Please review provided documentation for limitations.
FS-Cache: Cache "mycache" added (type cachefiles)
CacheFiles: File cache on sda2 registered
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
802.1Q VLAN Support v1.8 Ben Greear 
All bugs added by David S. Miller 
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.1 (Sep 17, 2013)
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
Rounding down aligned max_sectors from 4294967295 to 4294967288
  alloc irq_desc for 73 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 73 for MSI/MSI-X
  alloc irq_desc for 74 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 74 for MSI/MSI-X
  alloc irq_desc for 75 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 75 for MSI/MSI-X
  alloc irq_desc for 76 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 76 for MSI/MSI-X
  alloc irq_desc for 77 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 77 for MSI/MSI-X
  alloc irq_desc for 78 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 78 for MSI/MSI-X
  alloc irq_desc for 79 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 79 for MSI/MSI-X
  alloc irq_desc for 80 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 80 for MSI/MSI-X
  alloc irq_desc for 81 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:01:00.1: irq 81 for MSI/MSI-X
bnx2 0000:01:00.1: em2: using MSIX
ADDRCONF(NETDEV_UP): em2: link is not ready
  alloc irq_desc for 82 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 82 for MSI/MSI-X
  alloc irq_desc for 83 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 83 for MSI/MSI-X
  alloc irq_desc for 84 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 84 for MSI/MSI-X
  alloc irq_desc for 85 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 85 for MSI/MSI-X
  alloc irq_desc for 86 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 86 for MSI/MSI-X
  alloc irq_desc for 87 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 87 for MSI/MSI-X
  alloc irq_desc for 88 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 88 for MSI/MSI-X
  alloc irq_desc for 89 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 89 for MSI/MSI-X
  alloc irq_desc for 90 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 90 for MSI/MSI-X
bnx2 0000:02:00.0: em3: using MSIX
ADDRCONF(NETDEV_UP): em3: link is not ready
  alloc irq_desc for 91 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 91 for MSI/MSI-X
  alloc irq_desc for 92 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 92 for MSI/MSI-X
  alloc irq_desc for 93 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 93 for MSI/MSI-X
  alloc irq_desc for 94 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 94 for MSI/MSI-X
  alloc irq_desc for 95 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 95 for MSI/MSI-X
  alloc irq_desc for 96 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 96 for MSI/MSI-X
  alloc irq_desc for 97 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 97 for MSI/MSI-X
  alloc irq_desc for 98 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 98 for MSI/MSI-X
  alloc irq_desc for 99 on node -1
  alloc kstat_irqs on node -1
bnx2 0000:02:00.1: irq 99 for MSI/MSI-X
bnx2 0000:02:00.1: em4: using MSIX
ADDRCONF(NETDEV_UP): em4: link is not ready
fuse init (API version 7.13)
CE: hpet increasing min_delta_ns to 40226 nsec
CE: hpet increasing min_delta_ns to 60338 nsec
Bridge firewalling registered
megaraid_sas 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
megaraid_sas 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
ip_tables: (C) 2000-2006 Netfilter Core Team
megaraid_sas 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
megaraid_sas 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.

Return To Intel Xeon X5570 System Information